This is an outdated version published on 2024-01-31. Read the most recent version.

A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes

Authors

  • Alptekin Ulutaş Department of International Trade and Business, Inonu University, Malatya (Turkey)
  • Figen Balo Department of Metallurgy and Materials Engineering, Fırat University, Elazig (Turkey)
  • Ayse Topal Department of Business, Nigde Omer Halisdemir University, Nigde (Turkey)

DOI:

https://doi.org/10.7764/RDLC.22.3.646

Keywords:

Cladding, energy efficiency, green building, natural stone, MCDM, optimization.

Abstract

Most kinds of natural stones are perfect coating materials. Through utilizing stones with less thermal conductivity coefficients, isolation of constructions improves with energy effective resolution.  Modern building technologies prefer either decreasing stone to the weakest plausible extents or utilizing natural stones because natural stones have lower thermal conductivity with lighter weights. For this reason, first, the thermal and physical characteristics of natural stones used as coating material on the exterior walls of the buildings were investigated in this study. Then, in the light of these characteristics, natural stones with the best performance in terms of energy efficiency were determined using multi-criteria decision-making methods including FFSWARA and COBRA. The findings show that compressive strength is the most significant criteria and Isparta andesite stone is the most superior natural stone in terms of performance. This study contributes to the literature in three ways. First, the COBRA method used in this study has recently been introduced to the literature. Therefore, it has not been covered much in the literature. Second, this method has not been used in the selection of natural stone selection in the literature to our best knowledge. Third, this method has not been used together with the FFSWARA method before.

Downloads

Download data is not yet available.

References

Alchapar, N. L., & Correa, E. N. (2020). Optothermal properties of façade coatings. Effects of environmental exposure over solar reflective index. Journal of Building Engineering, 32, 101536.

Alqaed, S. (2022). Effect of annual solar radiation on simple façade, double-skin facade and double-skin facade filled with phase change materials for saving energy. Sustainable Energy Technologies and Assessments, 51, 101928.

Ayyildiz, E. (2022). Fermatean fuzzy step-wise Weight Assessment Ratio Analysis (SWARA) and its application to prioritizing indicators to achieve sus-tainable development goal-7. Renewable Energy, 193, 136-148.

Balaji, N. C., Mani, M., & Venkatarama Reddy, B. V. (2013, February). Thermal performance of the building walls. In Preprints of the 1st IBPSA Italy conference Free University of Bozen-Bolzano (Vol. 346, pp. 1-7).

Balo, F. (2011). Energy and economic analyses of insulated exterior walls for four different city in Turkey. Energy Educ Sci Technol Part A, 26(2), 175-188.

Basińska, M., Kaczorek, D., & Koczyk, H. (2020). Building thermo-modernisation solution based on the multi-objective optimisation method. Energies, 13(6), 1433.

Bostancioglu, E. (2021). Double skin façade assessment by fuzzy AHP and comparison with AHP. Architectural Engineering and Design Management, 17(1-2), 110-130.

Bostancioglu, E., & Onder, N. P. (2019). Applying analytic hierarchy process to the evaluation of double skin façades. Architectural Engineering and De-sign Management, 15(1), 66-82.

Camposinhos, R. D. S., Lello, J. C., Neves, M. T., & Santos, R. P. (2013). Structural performance of prestressed façade limestone panels. International Journal of Sustainable Materials and Structural Systems, 1(2), 161-187.

Chakraborty, S., Zavadskas, E. K., & Antucheviciene, J. (2015). Applications of WASPAS method as a multi-criteria decision-making tool. Economic Computation and Economic Cybernetics Studies and Research, 49(1), 5-22.

Clauser, C., & Huenges, E. (1995). Thermal conductivity of rocks and minerals. In Rock physics and phase relations: a handbook of physical constants, 3, 105-126.

Do, C. T., & Chan, Y. C. (2021). Daylighting performance analysis of a facade combining daylight-redirecting window film and automated roller shade. Building and Environment, 191, 107596.

Ginevičius, R., Podvezko, V., & Raslanas, S. (2008). Evaluating the alternative solutions of wall insulation by multicriteria methods. Journal of Civil Engi-neering and Management, 14(4), 217-226.

Guzman-Sanchez, S., Jato-Espino, D., Lombillo, I., & Diaz-Sarachaga, J. M. (2018). Assessment of the contributions of different flat roof types to achiev-ing sustainable development. Building and Environment, 141, 182-192.

Han, B., Wang, R., Yao, L., Liu, H., & Wang, Z. (2015). Life cycle assessment of ceramic façade material and its comparative analysis with three other common façade materials. Journal of Cleaner Production, 99, 86-93.

Han, B., Wang, R., Yao, L., Liu, H., & Wang, Z. (2015). Life cycle assessment of ceramic façade material and its comparative analysis with three other common façade materials. Journal of Cleaner Production, 99, 86-93.

Hasan, A. (1999). Optimizing insulation thickness for buildings using life cycle cost. Applied energy, 63(2), 115-124.

Ioannidou, D., Zerbi, S., & Habert, G. (2014). When more is better–Comparative LCA of wall systems with stone. Building and Environment, 82, 628-639.

Jin, X., Zhang, X., Cao, Y., & Wang, G. (2012). Thermal performance evaluation of the wall using heat flux time lag and decrement factor. Energy and Buildings, 47, 369-374.

Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A. (2021). Natural fiber reinforced composites: Sustainable materials for emerging applications. Results in Engineering, 11, 100263.

Krstić, M., Agnusdei, G. P., Miglietta, P. P., Tadić, S., & Roso, V. (2022). Applicability of industry 4.0 technologies in the reverse logistics: a circular economy approach based on comprehensive distance based ranking (COBRA) method. Sustainability, 14(9), 5632.

Kundu, S., & Tyagi, K. (2017). Selection and classification of common factors affecting the maintainability on the basis of common criteria. International Journal of Business Information Systems, 26(3), 402-412.

Lee, K. O., Medina, M. A., Sun, X., & Jin, X. (2018). Thermal performance of phase change materials (PCM)-enhanced cellulose insulation in passive solar residential building walls. Solar Energy, 163, 113-121.

LEED (2023). LEED/Green Building Rating System. https://www.usgbc.org/leed.

Liu, S., Kwok, Y. T., Lau, K. K. L., Chan, P. W., & Ng, E. (2019). Investigating the energy saving potential of applying shading panels on opaque façades: A case study for residential buildings in Hong Kong. Energy and Buildings, 193, 78-91.

Marques, B., Tadeu, A., António, J., Almeida, J., & de Brito, J. (2020). Mechanical, thermal and acoustic behaviour of polymer-based composite materials produced with rice husk and expanded cork by-products. Construction and Building Materials, 239, 117851.

Mawardi, I., Aprilia, S., Faisal, M., & Rizal, S. (2022). An investigation of thermal conductivity and sound absorption from binderless panels made of oil palm wood as bio-insulation materials. Results in Engineering, 13, 100319.

Menka, H. S. (2017). Energy Efficient Glazed Façade Design Strategies for High-Rise Office Buildings in Erbil City (Master's thesis). Retrieced from http://i-rep.emu.edu.tr:8080/jspui/bitstream/11129/4680/1/menkahawkar.pdf

Moghtadernejad, S., Chouinard, L. E., & Mirza, M. S. (2020). Design strategies using multi-criteria decision-making tools to enhance the performance of building façades. Journal of Building Engineering, 30, 101274.

Nacheman, R. J. (2005). The Empire State Building Facade: Evaluation and Repair of an Engineering Landmark. In Structures Congress 2005: Metropolis and Beyond (pp. 1-9).

Nadoushani, Z. S. M., Akbarnezhad, A., Jornet, J. F., & Xiao, J. (2017). Multi-criteria selection of façade systems based on sustainability criteria. Building and Environment, 121, 67-78.

Pastore, L., & Andersen, M. (2022). The influence of façade and space design on building occupants’ indoor experience. Journal of Building Engineering, 46, 103663.

Popov, Y. A., Pribnow, D. F., Sass, J. H., Williams, C. F., & Burkhardt, H. (1999). Characterization of rock thermal conductivity by high-resolution optical scanning. Geothermics, 28(2), 253-276.

Prafitasiwi, A. G., Rohman, M. A., & Ongkowijoyo, C. S. (2022). The occupant's awareness to achieve energy efficiency in campus building. Results in Engineering, 14, 100397.

Radmard, H., Ghadamian, H., Esmailie, F., Ahmadi, B., & Adl, M. (2020). Examining a numerical model validity for performance evaluation of a proto-type solar oriented Double skin Façade: Estimating the technical potential for energy saving. Solar Energy, 211, 799-809.

Rahmanian, A., & Rahmani, A. (2018). Effects and properties of double-layer anti-reflective coating In2O3/Conic Al2O3 and three-layer anti-reflective coatings of TiO2/In2O3/Conic Al2O3 on silicon substrate. Optik, 155, 163-170.

Ranjan, R., & Das, A. K. (2022). Protection from corrosion and wear by different weld cladding techniques: A review. Materials Today: Proceedings, 57, 1687-1693.

Rocchi, L., Kadziński, M., Menconi, M. E., Grohmann, D., Miebs, G., Paolotti, L., & Boggia, A. (2018). Sustainability evaluation of retrofitting solutions for rural buildings through life cycle approach and multi-criteria analysis. Energy and Buildings, 173, 281-290.

Rosasco, P., & Perini, K. (2019). Selection of (green) roof systems: A sustainability-based multi-criteria analysis. Buildings, 9(5), 134.

Sagbansua, L., & Balo, F. (2017). Ecological impact & financial feasibility of Energy Recovery (EIFFER) Model for natural insulation material optimiza-tion. Energy and Buildings, 148, 1-14.

Sayed, M. A. A. E. D. A., & Fikry, M. A. (2019). Impact of glass facades on internal environment of buildings in hot arid zone. Alexandria Engineering Journal, 58(3), 1063-1075.

Seddiki, M., Anouche, K., Bennadji, A., & Boateng, P. (2016). A multi-criteria group decision-making method for the thermal renovation of masonry buildings: The case of Algeria. Energy and Buildings, 129, 471-483.

Sert, M. (2010). Determination of physico-mechanical properties of stone originating in isparta and nevsehir volcanic terrains and studying their areas of use (Unpublished doctoral thesis). Isparta University, Isparta, Turkey.

Shameri, M. A., Alghoul, M. A., Sopian, K., Zain, M. F. M., & Elayeb, O. (2011). Perspectives of double skin façade systems in buildings and energy saving. Renewable and sustainable energy reviews, 15(3), 1468-1475.

Singh, T. N., Sinha, S., & Singh, V. K. (2007). Prediction of thermal conductivity of rock through physico-mechanical properties. Building and Environ-ment, 42(1), 146-155.

Streimikiene, D., Skulskis, V., Balezentis, T., & Agnusdei, G. P. (2020). Uncertain multi-criteria sustainability assessment of green building insulation mate-rials. Energy and Buildings, 219, 110021.

Suryanita, R., Maizir, H., Zulapriansyah, R., Subagiono, Y., & Arshad, M. F. (2022). The effect of silica fume admixture on the compressive strength of the cellular lightweight concrete. Results in Engineering, 14, 100445.

Theodosiou, T., Tsikaloudaki, K., Tsoka, S., & Chastas, P. (2019). Thermal bridging problems on advanced cladding systems and smart building facades. Journal of Cleaner Production, 214, 62-69.

Tovarović, J. Č., Ivanović-Šekularac, J., & Šekularac, N. (2017). Renovation of existing glass facade in order to implement energy efficiency and media facade. Energy and buildings, 152, 653-666.

Van Stijn, A., Eberhardt, L. C. M., Jansen, B. W., & Meijer, A. (2022). Environmental design guidelines for circular building components based on LCA and MFA: lessons from the circular kitchen and renovation façade. Journal of Cleaner Production, 357, 131375.

Wu, H., Liang, H., Roy, K., Harrison, E., Fang, Z., De Silva, K., Collins, N., & Lim, J. B. P. (2022). Analyzing the climate change potential of residential steel buildings in New Zealand and their alignment in meeting the 2050 paris agreement targets. Buildings, 12(3), 290.

Yu, J., & Song, B. (2018). Effects of heating time on the microstructure and properties of an induction cladding coating. Results in Physics, 11, 212-218.

Zavadskas, E. K., Bausys, R., Juodagalviene, B., & Garnyte-Sapranaviciene, I. (2017). Model for residential house element and material selection by neu-trosophic MULTIMOORA method. Engineering Applications of Artificial Intelligence, 64, 315-324.

Zavadskas, E. K., Kaklauskas, A., Turskis, Z., & Tamošaitiene, J. (2008). Selection of the effective dwelling house walls by applying attributes values determined at intervals. Journal of civil engineering and management, 14(2), 85-93.

Zavadskas, E. K., Turskis, Z., Volvačiovas, R., & Kildiene, S. (2013). Multi-criteria assessment model of technologies. Studies in Informatics and Control, 22(4), 249-258.

Zhang, C., Hu, M., Laclau, B., Garnesson, T., Yang, X., & Tukker, A. (2021). Energy-carbon-investment payback analysis of prefabricated envelope-cladding system for building energy renovation: Cases in Spain, the Netherlands, and Sweden. Renewable and Sustainable Energy Reviews, 145, 111077.

Zomorodian, Z. S., & Tahsildoost, M. (2018). Energy and carbon analysis of double skin façades in the hot and dry climate. Journal of Cleaner Production, 197, 85-96.

Downloads

Published

2023-12-31 — Updated on 2024-01-31

Versions

How to Cite

Ulutaş, A. ., Balo, F. ., & Topal, A. (2024). A new hybrid MCDM method for optimizing natural stone se-lection for building envelopes. Revista De La Construcción. Journal of Construction, 22(3), 646–660. https://doi.org/10.7764/RDLC.22.3.646 (Original work published December 31, 2023)

Most read articles by the same author(s)